BBX is a rear-wheel drive RC buggy that faithfully reproduces the traditional single-seater racing buggy that is gaining popularity in the United States, and has modern high driving performance. is. The chassis also pursues a real car feeling, such as a frame and suspension configuration that combines a roll cage with a lower deck with a flat back surface. A structure in which the driving battery is placed vertically and the motor is mounted at the rear end of the vehicle body to apply sufficient load to the drive wheels. A ball differential is built into the closed gearbox. The suspension is equipped with four high-performance, high-quality aluminum cylinder aeration oil dampers. The front is a double wishbone with upper and lower A arms with an attack angle of 25 degrees, and the rear is a trailing arm that can be aligned. In addition, the polycarbonate body, which features a sharp form full of realism, is divided into 6 parts.

BB-01 is a rear-wheel drive buggy chassis that pursues the feeling of a real car, such as a chassis and suspension configuration that combines a lower deck with a flat back surface and a roll cage. The battery for driving is installed vertically, the motor is mounted at the rear end of the vehicle body, and the structure is such that sufficient load is applied to the drive wheels, and the ball differential is built into the sealed gearbox. The suspension consists of double wishbones with upper and lower A-arms with an attack angle of 25 degrees at the front, and trailing arms with adjustable alignment at the rear. Equipped with 4 high-performance, high-quality aluminum cylinder aeration oil dampers, it exhibits stable driving performance even on rough roads. The front tires have a ribbed pattern for excellent directional stability, and the rear wheels have square spikes that emphasize grip. The front and rear plated wheels are hexagonal hub specifications. In addition, the rear roll cage can be flipped up by removing the screws, and the maintenance around the motor is also good.

●Length: 414mm, Width: 233mm, Height: 136mm

●Wheelbase: 283mm ●Tread: Front: 196mm, Rear: 202mm

●Main frame: Resin lower deck + roll cage

●Drive system: Rear wheel drive

●Differential gear: Ball differential

●Steering: 3 -Split tie rod type -Suspension = front double wishbone, rear trailing arm -Tire width/diameter = front 30/92mm, rear 38/96mm -Damper = aluminum cylinder aeration oil damper -Gear ratio = 12.42:1 (kit (When using a standard 18T pinion)

● 540 type motor with a shaft length of 10.5 mm or more (sold separately)

● Full bearing specifications

● Speed ​​controller = ESC specifications (sold separately) [Required separately]

- 540 type motor - RC mechanism: 2 channel radio set (transmitter, receiver, ESC, low profile servo) - Battery for running, charger - Power supply for transmitter