Push the throttle hard off-road and still never lose control - the Hyper Go 1:16 scale truggy accelerates up to 45 km/h with its 2845 brushless racing motor and ensures precise handling with regulation options. These include two adjustable top speed settings, a fast steering servo for agile direction changes, adjustable aluminium oil-pressure shock absorbers, adjustable suspension and an adjustable wheelie bar. Metal CVD drive shafts, metal propshaft and 45A brushless controller incl. active fan round off the equipment.
The entire electronics are protected against splash water and allow unrestricted outdoor use. The large high-grip tyres made of soft rubber ensure full grip on any surface. In addition, the model is equipped with a bright switchable LED light for great action even in the dark. 
The handy 3-channel remote control transmits all functions without interference and also allows the operation of several models in parallel thanks to the 2.4 GHz system. The model is available as an RTR package (Ready-to-Run), i.e. all components - except for household batteries for the remote control - are already included

Features:

• Adjustable chassis: For more directional stability on the front axle
• Metal cardan shaft: For wear-free drive to the metal differentials
• Metal CVD drive shafts: For direct drive to the wheels
• 2S LiPo power with 7.4V, 25C and 1050mAh in a hardcase battery specially developed for the series
• Professional brushless racing motor for high speeds of up to approx. 45km/h
• Fast steering servo for agile directional changes on any surface
• Robust body with internal body frame for high strength
• Composite chassis for good durability
• Partial aluminium shock absorbers
• Metal propshaft
• Full ball bearings
• High ground clearance (approx. 31mm)
• Bonnet with body clips and rubber tabs for safe removal
• Bright switchable LED lighting fitted
• Adjustable wheelie bar included
• Adjustable top speed on transmitter in two steps

Specs:

• Scale: 1:16
• Length: 310mm
• Width: 220mm
• Height: 120mm
• Weight: 1055g incl. battery
• Wheelbase: 175mm
• Track width front: 190mm
• Track width rear: 185mm
• Ground clearance: approx. 31mm
• Front wheels: Outer diameter/width 80/45mm
• Rear wheels: outside diameter/width 80/45mm 
• Rim diameter: 50mm
• Gearbox: Metal
• Front shocks: 60mm
• Rear damper: 60mm
• Brake: Electronic
• ESC: Brushless 45A
• Motor: 2845 Brushless
• Drive system: Cardan metal
• Steering servo: Mini
• Main material: Composite plastic
• Battery compartment dimensions: 110x35x24mm
• Battery: LiPo 2S 7.4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74g
• Drive time: up to 12min
• Top speed: up to 45km/h
• Remote control: 3-channel, 2,4GHz
• Range: approx. 100m
• Charger: USB-Balancer charger with 7,4V 1,5A output power
• Charging time: approx. 60min

Contents:

• Vehicle
• Remote control
• Battery
• USB charging cable
• Wheelie bar
• Screw set
• Tools
• Instruction manual