What's in the box 
  • 1x FOC motor w/ built-in ESC 
  • Factory-installed XT60 plug
  • 1x Decal and Manual
  • 1x Heatsink kit, double-sided tape, and zip ties. 
Bottomline
  • The integrated design of the ESC and the motor greatly reduces the overall volume and weight and makes the layout and wiring of the car frame simpler and more convenient. 
  • In the FOC driving mode, low-speed torque is strong. Smooth running at extremely low speed, which is far superior to the common sensored brushless power system, even better than the brushed power.
  • Thanks to the sine wave driving mode, the whole system has high efficiency, small heat, and effectively extends the endurance time; and the motor runs more quietly and soft.
  • The protection grade of the whole system is IP67, with excellent waterproof and dustproof performance. Under various weather conditions, the whole system can easily deal with the complex road surface containing silt, ice and snow, and water.
  • Intelligent torque output and speed closed-loop control, fully experience the cruise control and steep slope slow descent function of 1:1 vehicle, making the control handy.
  • Active drag brake force adjustment, providing unprecedented parking capacity on a slope.
  • With a strong built-in switch mode BEC, the continuous current is up to 6A, and support switch between 6V and 7.4v, easy to drive various powerful steering servos and high-voltage steering servo. • Multiple protection functions: battery low voltage protection, overheat protection, throttle lost protection, lock-up protection.
  • Supports HOBBYWING LED program box to set ESC parameters and has an independent parameter setting interface, which is integrated with an electronic switch, making setting parameters more convenient.
Remarks & References
  • 1/10 FOC brushless 540 'spec' motor w/ a built-in-ESC (Patented design)
  • Motor Volume:550
Specifications
 p/n

30120402
Motor KV 2300KV
Cont./Peak Current  60A/200A
Input Voltage 2-3S Lipo/6-9 Cell NiMH
BEC Output Switch Mode:6V/7.4V,6A
Input wires Red-14AWG-330mm*1 / Black-14AWG-330mm*1
Input connector XT60 (factory installed)
Programming Port Independent programming interface(switch position
Size / Weight 37mm x 58mm / 209g (w/ wires+plug)
Shaft dim 3.175mm / 16mm
Motor Pole 4
Programming LED programmer (Sold separately)
SKU 6938994420105
Shipping Weight 0.6000kg
Shipping Width 0.150m
Shipping Height 0.150m
Shipping Length 0.150m
Shipping Cubic 0.003375000m3
Type HOBBIES-HOBBYWING

Be The First To Review This Product!

Help other Sik Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review