DETRUM DTM-T018BL BLITZ DT9 9CH SMART TRANSMITTER WITH SR86A-G AUTOPILOT RECEIVER BLUE

Simple and Powerful, Detrum Blitz DT9 is a 2.4GHz 9-channel smart transmitter with telemetry and programing capabilities. With one transmitter, you can take the full control of your flying from all aspects, whether it is ESC settings, gyro receiver programming, BNP with various types of receivers or wireless training.with full telemetry function,the blitz Dt9 can receive temperature , altitude,GPS,voltage,current and telemetry data ,to keep you motre connected to your flying than ever before ,The blitz DT9 also works with all detrum stablizter receiver and back the telemetry data Experience the latest Detrum Blitz! KEY FEATURES —9 fully-proportional channels —Model type: airplane, helicopter, multi-rotor, and glider Ÿ—Frame rate: 2.6ms Ÿ—Can store up to 250 models —ŸSynthesized voice broadcasting Ÿ—Vibration alert for alarm conditions and low battery Ÿ—Trainer system Ÿ—High resolution 192*96 backlit LCD screen Ÿ—Dual antenna diversity Ÿ—Multiple flight mode settings —ŸTelemetry —Ÿ4 stick modes —Fail-safe Ÿ—Audio interface Ÿ—Set the programming parameters of ESC online by this transmitter Ÿ—Set the programming parameters of stabilized receiver online by this transmitter —ŸSD card support for backing up files, firmware update, and import/export model data —Ÿ3-position switches: 6 Ÿ—2-position switches: 1 Ÿ—Momentary switches: 1 —Knobs: 2 —ŸThumbwheels: 2 Ÿ—Digital trims: 6 —ŸRoll the scroll wheel to move through the screen content or change programming values. Press the scroll wheel to make a selection Ÿ—End point adjustment Ÿ—Sub Trim adjustment Ÿ—Channel monitoring —Programmable mixes —Ÿ7.4V 3000mAh Li-Po rechargeable battery —ŸCharge online Ÿ—Superior ergonomics that fit the way you fly Ÿ—The stick lever tension can be adjusted Ÿ—4096 high section precision sticks —2 timers Airplane —Servo delay —Throttle hold —Programmable mixings Ÿ—Throttle to Balance mixing Ÿ—Veer to Elevator mixing Ÿ—V-tail mixing Ÿ—Delta mixing Ÿ—Flaperon mixing Ÿ—3 tail types: normal, V-tail, and delta Ÿ—9-point elevator curves Ÿ—9-point throttle curves Ÿ—9-point rudder curves Ÿ—9-point aileron curves Helicopter Ÿ—Servo delay Ÿ—Throttle hold —Swash mixing Ÿ—9-point elevator curves Ÿ—9-point throttle curves Ÿ—9-point rudder curves Ÿ—9-point aileron curves Specifications Number of Channels 9 Modulation / Protocol DSSS&FHSS Band 2.4GHz Frame Rate 2.6ms Telemetry Yes Voice Alerts Yes SD Card Support Yes Upgradeable Firmware Yes Trainer System Yes (both wired and wireless) ESC Parameter Setting Support Yes Stabilized Receiver Setting Support Yes Black Box Yes Built-in Charging Module Yes Battery 7.4V 3000mAh Li-Po (included) Charging Voltage DC 12V/1.5A Consuming Current < 300mA Size 204×246×122mm Net Weight 693g (without battery) /834g (with battery) SR86A-G smart receiver with GPS Features Return Home Adding path control based on the auto-recovery mode, it allows the airplane to automatically plan the path, lead the airplane back to the starting point. Height is controllable during the return flight. You can exit the return mode at any time by waving the return switch, supporting one-button return and signal loss return. Main Control IC 32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset Control Algorithm Original airplane attitude stabilization algorithm and control algorithm. Support normal wing, fly wing, V-tail airplanes, and 3D planes. Flight Mode Four flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance). You can switch between different modes by the toggle switch. Adjusting the Gain Set the gain and other programmable items with matched transmitter. High Sensitivity SR86A adopts 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping (FHSS) technologies, having high receiving sensitivity and strong anti-interference capability. Diversity Antenna By using diversity antenna, combined with the signal detection and switching algorithm, the receiving signal is stable and reliable. Unique ID Code Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver. Output Signals 8-channel PWM Specifications Channels 8-channel Sensor 6-axis gyro Sensitivity -97dBm Output PWM (71Hz) Transmission Range More than 1,000 meters on the ground, more than 1,600 meters in the air Input Voltage 3.6V ~ 16V Size 42.3mm*31mm*13.1mm Weight 14g Compatible Products Gavin 8c ,Blitz DT9